12kV SF6 high voltage Gas Insulated ring main unit
| Brand | ROCKWILL |
| Model NO. | 12kV SF6 high voltage Gas Insulated ring main unit |
| Rated voltage | 12kV |
| Rated frequency | 50/60Hz |
| Series | XGN |
Description
XGN15-12 SF6 high voltage ring main unit is a new generation of air-insulated metal-enclosed switchgear. Through continuous improvement, its perfect performance and flexible assembly characteristics can meet the changing needs of the market.
XGN15-12 SF6 high voltage ring main unit provides technical solutions for various applications. The device is safe, convenient and compact in size. For 12kV ring network power supply, double radiation power supply system. It can also be used for terminal power supply, as a control and protection device for electrical energy, and is also suitable for installation in box-type substations.
XGN15-12 high voltage SF6 gas insulated rmu is a compact and scalable switchgear suitable for distribution automation systems. It has the interlock function to prevent the load switch from being closed, to prevent the grounding switch from closing the load switch and the lower door when the grounding switch is in the closed position. Sensing technology and the use of the latest protection relays make the switchgear suitable for operation in demanding hospitals and airports, etc。
Feature
-
72.5kV 126kV 145kV HV Gas Insulated Switchgear (GIS)
-
550kV HV Gas Insulated Switchgear (GIS)
-
800kV HV Gas Insulated Switchgear (GIS)
-
40.5kV HV Gas Insulated Switchgear (GIS)
-
252kV HV Gas Insulated Switchgear (GIS)
-
145kV HV Gas-Insulated Switchgear (GIS)
-
420kV HV Gas Insualted Switchgear(GIS)
-
550kV Gas Insulated Switchgear HV (GIS)
-
12/24/36kV SF6 gas insualted Switchgear C-GIS
-
24kV 40.5kV 27.5kV SF6 Gas Insulated Metal-clad Switchgear
-
Design Solution of 24kV Dry Air Insulated Ring Main UnitThe combination of Solid Insulation Assist + Dry Air Insulation represents the development direction for 24kV RMUs. By balancing insulation requirements with compactness and employing solid auxiliary insulation, insulation tests can be passed without significantly increasing phase-to-phase and phase-to-ground dimensions. Encapsulating the pole column solidifies the insulation for the vacuum interrupter and its connecting conductors.Maintaining the 24kV outgoing busbar phase spacing at 110mm,16/08-2025 -
Optimization Design Scheme for the 12kV Air-Insulated Ring Main Unit Isolating Gap to Reduce Breakdown Discharge ProbabilityWith the rapid development of the power industry, the ecological concept of low-carbon, energy-saving, and environmental protection has been deeply integrated into the design and manufacturing of power supply and distribution electrical products. The Ring Main Unit (RMU) is a key electrical device in distribution networks. Safety, environmental protection, operational reliability, energy efficiency, and economy are inevitable trends in its development. Traditional RMUs are primarily represented16/08-2025 -
Analysis of Common Problems in 10kV Gas-Insulated Ring Main Units (RMUs)Introduction:10kV gas-insulated RMUs are widely used due to their numerous advantages, such as being fully enclosed, possessing high insulation performance, requiring no maintenance, having a compact size, and offering flexible and convenient installation. At this stage, they have gradually become a critical node in urban distribution network ring-main power supply and play a significant role in the power distribution system. Problems within gas-insulated RMUs can severely impact the entire di16/08-2025 -
SF6-Free Solution for Air-Insulated/Eco-friendly Gas Ring Main UnitsⅠ. Technical Bottlenecks of SF₆ SubstitutionInsulation Medium Performance Gapo Dried Air/N₂ insulation strength is only 1/3 of SF₆, requiring expansion of contact gap from 60mm to ≥150mm.o Conventional spring mechanisms lack energy to drive rapid closure of large gaps, easily causing contact ablation due to pre-strike.o Synthetic gases (e.g., C4+CO₂) decompose under arcing, leading to irreversible insulation degradation.Mechanical Structural Limitationso National Grid standardization fix16/08-2025 -
Implementation Scheme for Installing Lightning Arresters or Voltage Transformers in Gas-Insulated Ring Main UnitsAccording to insulation type, ring main units (RMUs) can be categorized as gas-insulated or air-insulated. The former installs primary circuit components in a sealed metal enclosure filled with low-pressure gas (primarily SF₆ or mixed gases) as the insulating medium, using cable terminals for incoming and outgoing lines. Due to superior insulation, compact size, and modular design, they are widely used in 10kV outdoor distribution substations and prefabricated transformer stations. However, thei16/08-2025 -
Pressure Relief Safety Solution for Gas-Insulated Ring Main UnitsⅠ. Problem ContextAs a core component in urban power distribution networks, ring main units (RMUs) are widely used in residential areas, factories, and public buildings due to their compact structure, low cost, and high reliability. However, internal equipment failures or arc faults may generate high-temperature, high-pressure gas, leading to cabinet explosions that endanger personnel and equipment. While traditional sealed designs maintain insulation integrity, they fail to rapidly release sud16/08-2025
