35kV-110kV High Voltage Shunt Capacitor Bank With Large Capacity
| Brand | ROCKWILL |
| Model NO. | 35kV-110kV High Voltage Shunt Capacitor Bank With Large Capacity |
| Rated voltage | 35kV |
| Rated frequency | 50/60Hz |
| Series | BAMH |
Overview
The high-voltage and large-capacity assembled shunt capacitor device is used in AC power systems of 1000kV and belo in areas with limited floor space or high seismic requirements, providing reactive power compensation for industrial frequency power systems.
Main features
Adopting new type of integrated internal capacitor unit, the quality is safe and reliable.
The product has compact structure, large capacity and small footprint.
The hierarchical design of multiple insulation platforms greatly improves the explosion resistance level of the product.
The capacitor body is designed with a terminal box with a signal collector, which is used to collect the voltage, current, temperature, pressure, gas and other signals during the operation of the capacitor, which is convenient for monitoring the operation status of the capacitor.
The core adopts high-quality new insulating materials and point-shaped insulation structure, which can not only ensure good internal insulation performance, but also ensure smooth heat dissipation of the core, making it safer and more reliable to operate.
The main components adopt bolt type and detachable structure, which is convenient for installation and transportation, as well as for on-site maintenance.
Parameters
Rated frequency |
50/60Hz |
Rated voltage |
20kV,35kV,66kV,110kV |
Rated capacity |
35kV voltage level: three-phase integrated 10000kvar, single-phase 3334, 6667, 10000, 20000kvar. 66kV voltage level: single-phase 20000kvar 110kV voltage level: single-phase 80,000kvar |
Number of phases |
Three-phase or single-phase |
Loss tangent |
tanδ≤0.0005 |
Climbing distance of outlet casing |
≥35mm/kV |
Contamination level of casing |
D |
Capacitance deviation |
The deviation between the measured capacitance and its rated value shall not exceed 0~+5%, and the ratio of the maximum value to the minimum value between any two line terminals of the three-phase capacitor shall not exceed 1.02 |
Altitude |
≤1000m |
Environmental temperature category |
-40/B |
Installation location |
Outdoor, It can also be used indoors or in areas that require a small area |
Surrounding environment |
No severely corrosive gas and steam to metal, no conductive or explosive dust, no severe mechanical vibration. |
Function
The high-voltage large-capacity tank type shunt capacitor mainly used for the 110kV, 66kV and 35kV side of main transformers in areas with limited area or high seismic requirements, to improve the power factor of the grid, reduce line losses, compensate to the efficiency of power supply and distribution, and improve the quality of the power supply voltage. It has the advantages of good seismic performance, small footprint, and easy installation and maintenance.
-
6KV High Voltage Power Capacitor Single Phase With SS Case
-
15kV High Voltage Shunt Capacitor 400kvar Reduce Power Loss
-
7.75kV 475kVar High Voltage Power Factor Capacitor Bank
-
10.04kV 246.4kVar HV High Voltage Capacitor Increase Equipment Utilization
-
6.35KV100 kVar High Voltage Capacitor Bank
-
Compact HV Shunt Capacitor Bank upto 80000kVar
-
7.94KV 460kVar High Voltage Filter Capacitor Improve Power Factor
-
4.04kV 200 kVar Capacitor Bank High Voltage
-
6kV~10kV Customized High Voltage Shunt Capacitor Bank
-
10kV 200kvar High voltage Power Capacitor
-
Design Solution of 24kV Dry Air Insulated Ring Main UnitThe combination of Solid Insulation Assist + Dry Air Insulation represents the development direction for 24kV RMUs. By balancing insulation requirements with compactness and employing solid auxiliary insulation, insulation tests can be passed without significantly increasing phase-to-phase and phase-to-ground dimensions. Encapsulating the pole column solidifies the insulation for the vacuum interrupter and its connecting conductors.Maintaining the 24kV outgoing busbar phase spacing at 110mm,16/08-2025 -
Optimization Design Scheme for the 12kV Air-Insulated Ring Main Unit Isolating Gap to Reduce Breakdown Discharge ProbabilityWith the rapid development of the power industry, the ecological concept of low-carbon, energy-saving, and environmental protection has been deeply integrated into the design and manufacturing of power supply and distribution electrical products. The Ring Main Unit (RMU) is a key electrical device in distribution networks. Safety, environmental protection, operational reliability, energy efficiency, and economy are inevitable trends in its development. Traditional RMUs are primarily represented16/08-2025 -
Analysis of Common Problems in 10kV Gas-Insulated Ring Main Units (RMUs)Introduction:10kV gas-insulated RMUs are widely used due to their numerous advantages, such as being fully enclosed, possessing high insulation performance, requiring no maintenance, having a compact size, and offering flexible and convenient installation. At this stage, they have gradually become a critical node in urban distribution network ring-main power supply and play a significant role in the power distribution system. Problems within gas-insulated RMUs can severely impact the entire di16/08-2025 -
SF6-Free Solution for Air-Insulated/Eco-friendly Gas Ring Main UnitsⅠ. Technical Bottlenecks of SF₆ SubstitutionInsulation Medium Performance Gapo Dried Air/N₂ insulation strength is only 1/3 of SF₆, requiring expansion of contact gap from 60mm to ≥150mm.o Conventional spring mechanisms lack energy to drive rapid closure of large gaps, easily causing contact ablation due to pre-strike.o Synthetic gases (e.g., C4+CO₂) decompose under arcing, leading to irreversible insulation degradation.Mechanical Structural Limitationso National Grid standardization fix16/08-2025 -
Implementation Scheme for Installing Lightning Arresters or Voltage Transformers in Gas-Insulated Ring Main UnitsAccording to insulation type, ring main units (RMUs) can be categorized as gas-insulated or air-insulated. The former installs primary circuit components in a sealed metal enclosure filled with low-pressure gas (primarily SF₆ or mixed gases) as the insulating medium, using cable terminals for incoming and outgoing lines. Due to superior insulation, compact size, and modular design, they are widely used in 10kV outdoor distribution substations and prefabricated transformer stations. However, thei16/08-2025 -
Pressure Relief Safety Solution for Gas-Insulated Ring Main UnitsⅠ. Problem ContextAs a core component in urban power distribution networks, ring main units (RMUs) are widely used in residential areas, factories, and public buildings due to their compact structure, low cost, and high reliability. However, internal equipment failures or arc faults may generate high-temperature, high-pressure gas, leading to cabinet explosions that endanger personnel and equipment. While traditional sealed designs maintain insulation integrity, they fail to rapidly release sud16/08-2025
