Customization 35kV 38kV 40kV 40.5kV Class Three-phase oil-immersed Power transformer
| Brand | ROCKWILL |
| Model NO. | 35kV Class oil-immersed transformer |
| Rated capacity | 63kVA |
| Primary voltage | 10.5kV |
| Secondary voltage | 0.4kV |
| Methods of regulation | On Load Voltage Regulating |
| Winding type | Three Winding |
| Series | S/SBH Series |
Overview
As a pioneer in China's power transformer industry, we have specialized in the R&D and manufacturing of power transformer equipment for decades, and established industry standards with core technologies.
1.Iron Core
The iron core is made of cold rolled, granular-oriented, low-loss and high magnetic conductive silicon steel, which is of multi-step completely tilted structure to reduce the loss and noise.
Iron core with fixed clamps optimizes the design so as to ensure mechanical strength and to reduce leakage losses.
Adoption of PET banding structure ensures the clamp force of core column and lowers the noise.
2.Winding
Using cylinder type, foil type, screw type, continuous type and interleaved type to ensure uniform voltage distribution.
Adopting oil-oriented architecture in the winding to reduce temperature rise. To set up separate tap winding in large capacity transformers to eliminate damage when short circuit occurs.
3. Active-parts
Cold pressing ensures cleanness of the body active parts and the reliability of leads. Adoption of whole assembled phase insulation so as to reduce the assembly and effective guarantee the dimension and shape of the insulation structure.
4.Oil Tank
The oil tank of 35kV transformer adopts barrel type or bell type structure and use finned radiator. It usually don't have trolley while allocating standard base for installation. To kink the tank wall as one-stop forming to avoid weld seam.
The oil tank of 10kV transformer adopts L-bar type and use corrugated radiator. It use water proof test, air leakage test and oil leakage test to guarantee leakage free. The surface coating is strictly controlled.
The voltage classes of some of these Power Transformer include 6kV, 6.3kV, 6.6kV, 6.9kV, 7.2kV, 10kV, 10.5kV, 11kV, 11.5kV, 12kV, 13.2kV, 13.8kV, 14.5kV, 14.4kV, 15kV, 15.5kV, 15.6kV, 17.5kV, 20kV, 21.9kV, 22kV, 24kV, 30kV, 33kV, 33.5kV, 34.5kV, 35kV, 36kV, 38kV, 38.5kV, 40.5kV, 44kV, 45kV, 46kV, 66kV 69kV.72.5kV 88kV 110kV 115kV 123kV 125kV 126kV 132kV 138kV 145kV 150kV 154kV 161kV 170kV 220kV 225kV 230kV 245kV 275kV 330kV 345kV 363kV 380kV 400kV 500kV Power transformers of voltage ，and aboveand customization is available.
Operating condition
1.working temperature：-25℃~40℃
2.Relative humidity: ＜90% (25℃)
3.No corrosive gas, no obvious dirt, etc.
4.Altitude: ＜1000m
5.Installation place: Without corrosive gas, dirt and so on
6.Special conditions: customized products are available
This power transformer is fully compliant with international standards including IEC 60076-1, IEEE C57.12.00, ANSI C57.12.90, AS/NZS 60076.5 and EN 61558-1. It meets quality requirements and is widely adaptable to the operational needs of power grids in multiple overseas regions.
Application Field
Power Industry
New Energy Industry
Industrial Manufacturing Industry
Infrastructure and Public Services Industry
If you need to know about more parameters , Please check the model selection manual.
-
JP-0.4kV Reactive metering integrated distribution cabinet for district transformer
-
15kV 20kV 22kV 30kV 33kV 35kV oil-immersed neutral grounding resistance to transformer (earthing transfoemer)
-
22kV 30kV 33kV 66kV Three phase Oil Immersed Grounding /Earthing Transformer Manufacturer
-
20kV 44kV 145kV 150kV Three Phase Oil-Immersed Neutral Earthing Transformer Custom Factory
-
Customization 15kV 30kV 33kV 34.5kV 36kV Three Phase Neutral Grounding/earthing Transformer direct supply
-
Customization Three - phase 11kV 20kV 22kV 30kV grounding/earthing transformers Original Manufacturer
-
Customization 66kV 88kV 110kV 132kV Three Phase Z-type winding Oil-Immersed Earthing Transformer source manufacturer
-
33KV Electric Pad Mounted Transformer
-
ZGS11-400KVA Pad-Mounted Transformer
-
2000KVA 1600KVA 11KV 13.2KV 13.8KV Pad-Mounted Transformers
-
Design Solution of 24kV Dry Air Insulated Ring Main UnitThe combination of Solid Insulation Assist + Dry Air Insulation represents the development direction for 24kV RMUs. By balancing insulation requirements with compactness and employing solid auxiliary insulation, insulation tests can be passed without significantly increasing phase-to-phase and phase-to-ground dimensions. Encapsulating the pole column solidifies the insulation for the vacuum interrupter and its connecting conductors.Maintaining the 24kV outgoing busbar phase spacing at 110mm,16/08-2025 -
Optimization Design Scheme for the 12kV Air-Insulated Ring Main Unit Isolating Gap to Reduce Breakdown Discharge ProbabilityWith the rapid development of the power industry, the ecological concept of low-carbon, energy-saving, and environmental protection has been deeply integrated into the design and manufacturing of power supply and distribution electrical products. The Ring Main Unit (RMU) is a key electrical device in distribution networks. Safety, environmental protection, operational reliability, energy efficiency, and economy are inevitable trends in its development. Traditional RMUs are primarily represented16/08-2025 -
Analysis of Common Problems in 10kV Gas-Insulated Ring Main Units (RMUs)Introduction:10kV gas-insulated RMUs are widely used due to their numerous advantages, such as being fully enclosed, possessing high insulation performance, requiring no maintenance, having a compact size, and offering flexible and convenient installation. At this stage, they have gradually become a critical node in urban distribution network ring-main power supply and play a significant role in the power distribution system. Problems within gas-insulated RMUs can severely impact the entire di16/08-2025 -
SF6-Free Solution for Air-Insulated/Eco-friendly Gas Ring Main UnitsⅠ. Technical Bottlenecks of SF₆ SubstitutionInsulation Medium Performance Gapo Dried Air/N₂ insulation strength is only 1/3 of SF₆, requiring expansion of contact gap from 60mm to ≥150mm.o Conventional spring mechanisms lack energy to drive rapid closure of large gaps, easily causing contact ablation due to pre-strike.o Synthetic gases (e.g., C4+CO₂) decompose under arcing, leading to irreversible insulation degradation.Mechanical Structural Limitationso National Grid standardization fix16/08-2025 -
Implementation Scheme for Installing Lightning Arresters or Voltage Transformers in Gas-Insulated Ring Main UnitsAccording to insulation type, ring main units (RMUs) can be categorized as gas-insulated or air-insulated. The former installs primary circuit components in a sealed metal enclosure filled with low-pressure gas (primarily SF₆ or mixed gases) as the insulating medium, using cable terminals for incoming and outgoing lines. Due to superior insulation, compact size, and modular design, they are widely used in 10kV outdoor distribution substations and prefabricated transformer stations. However, thei16/08-2025 -
Pressure Relief Safety Solution for Gas-Insulated Ring Main UnitsⅠ. Problem ContextAs a core component in urban power distribution networks, ring main units (RMUs) are widely used in residential areas, factories, and public buildings due to their compact structure, low cost, and high reliability. However, internal equipment failures or arc faults may generate high-temperature, high-pressure gas, leading to cabinet explosions that endanger personnel and equipment. While traditional sealed designs maintain insulation integrity, they fail to rapidly release sud16/08-2025
