ACUS-E Series Metal Enclosed Capacitor Banks
| Brand | ROCKWILL |
| Model NO. | ACUS-E Series Metal Enclosed Capacitor Banks |
| Rated voltage | 12kV |
| Rated frequency | 50/60Hz |
| Capacity | 1 MVAr |
| Series | ACUS-E Series Metal Enclosed Capacitor Banks |
Overview
The ACUS E-Series MECB consists of a compact modular enclosure that combines primary components with secondary control and protection equipment. The system can be either configured as fixed or switched, with the switched bank consisting of single or multiple steps, automatically controlled to improve power factor.
ACUS E-Series MECB is available in a range of models and is suitable for voltages up to 38 kV. It is fully assembled and factory tested in an ISO 9001 and ISO 14001 environment.
The design of the ACUS E-Series MECB provides a solution suitable for electrical distribution utilities, integrators of renewable power e.g. wind or solar farm integrators and large industrial power users including mining, pulp and paper, chemical, petrochemical, plastics, cement and heavy industries.
Incomer module
● Incoming cable termination busbars
● Isolator/ earth switch
● Surge arresters
● Circuit breakers
● Protection voltage transformers
● Line current transformers
● Control voltage transformers
● Live line indication
Power module
● Capacitors
● Inrush, detuning or filter reactors
● HRC fuses
● Contactors
● Pressure switches
● Earthing stick
● Safety interlocks
● Lights
● Heaters
● Cooling fans
● Thermostats
Control cubicle
● Power factor controller with modbus communication
● Safety interlock keys
● Over current/ earth fault protection relay
● Unbalance protection relay
● Unbalance/ overload protection relay
● Under/ overvoltage protection relay
● Local/ remote and manual/ automatic switching
Technology parameters
-
6KV High Voltage Power Capacitor Single Phase With SS Case
-
15kV High Voltage Shunt Capacitor 400kvar Reduce Power Loss
-
7.75kV 475kVar High Voltage Power Factor Capacitor Bank
-
10.04kV 246.4kVar HV High Voltage Capacitor Increase Equipment Utilization
-
6.35KV100 kVar High Voltage Capacitor Bank
-
Compact HV Shunt Capacitor Bank upto 80000kVar
-
7.94KV 460kVar High Voltage Filter Capacitor Improve Power Factor
-
4.04kV 200 kVar Capacitor Bank High Voltage
-
35kV-110kV High Voltage Shunt Capacitor Bank With Large Capacity
-
6kV~10kV Customized High Voltage Shunt Capacitor Bank
-
Design Solution of 24kV Dry Air Insulated Ring Main UnitThe combination of Solid Insulation Assist + Dry Air Insulation represents the development direction for 24kV RMUs. By balancing insulation requirements with compactness and employing solid auxiliary insulation, insulation tests can be passed without significantly increasing phase-to-phase and phase-to-ground dimensions. Encapsulating the pole column solidifies the insulation for the vacuum interrupter and its connecting conductors.Maintaining the 24kV outgoing busbar phase spacing at 110mm,16/08-2025 -
Optimization Design Scheme for the 12kV Air-Insulated Ring Main Unit Isolating Gap to Reduce Breakdown Discharge ProbabilityWith the rapid development of the power industry, the ecological concept of low-carbon, energy-saving, and environmental protection has been deeply integrated into the design and manufacturing of power supply and distribution electrical products. The Ring Main Unit (RMU) is a key electrical device in distribution networks. Safety, environmental protection, operational reliability, energy efficiency, and economy are inevitable trends in its development. Traditional RMUs are primarily represented16/08-2025 -
Analysis of Common Problems in 10kV Gas-Insulated Ring Main Units (RMUs)Introduction:10kV gas-insulated RMUs are widely used due to their numerous advantages, such as being fully enclosed, possessing high insulation performance, requiring no maintenance, having a compact size, and offering flexible and convenient installation. At this stage, they have gradually become a critical node in urban distribution network ring-main power supply and play a significant role in the power distribution system. Problems within gas-insulated RMUs can severely impact the entire di16/08-2025 -
SF6-Free Solution for Air-Insulated/Eco-friendly Gas Ring Main UnitsⅠ. Technical Bottlenecks of SF₆ SubstitutionInsulation Medium Performance Gapo Dried Air/N₂ insulation strength is only 1/3 of SF₆, requiring expansion of contact gap from 60mm to ≥150mm.o Conventional spring mechanisms lack energy to drive rapid closure of large gaps, easily causing contact ablation due to pre-strike.o Synthetic gases (e.g., C4+CO₂) decompose under arcing, leading to irreversible insulation degradation.Mechanical Structural Limitationso National Grid standardization fix16/08-2025 -
Implementation Scheme for Installing Lightning Arresters or Voltage Transformers in Gas-Insulated Ring Main UnitsAccording to insulation type, ring main units (RMUs) can be categorized as gas-insulated or air-insulated. The former installs primary circuit components in a sealed metal enclosure filled with low-pressure gas (primarily SF₆ or mixed gases) as the insulating medium, using cable terminals for incoming and outgoing lines. Due to superior insulation, compact size, and modular design, they are widely used in 10kV outdoor distribution substations and prefabricated transformer stations. However, thei16/08-2025 -
Pressure Relief Safety Solution for Gas-Insulated Ring Main UnitsⅠ. Problem ContextAs a core component in urban power distribution networks, ring main units (RMUs) are widely used in residential areas, factories, and public buildings due to their compact structure, low cost, and high reliability. However, internal equipment failures or arc faults may generate high-temperature, high-pressure gas, leading to cabinet explosions that endanger personnel and equipment. While traditional sealed designs maintain insulation integrity, they fail to rapidly release sud16/08-2025
