Compact HV Shunt Capacitor Bank upto 80000kVar
| Brand | ROCKWILL |
| Model NO. | Compact HV Shunt Capacitor Bank upto 80000kVar |
| Rated voltage | 35kV |
| Rated frequency | 50/60Hz |
| Series | TBB |
Overview
High-voltage shunt capacitor devices mainly include the following equipment: high-voltage shunt capacitors, series reactors, discharge coils, zinc oxide arresters, isolation grounding switches, frames, bus bars, connecting wires, post insulators, cabinets or fences, etc. The capacitor device switching circuit breaker and its protection device and controller can be included in the supply according to the needs of users.
High-voltage shunt capacitor devices are mainly used in power frequency three-phase AC power systems to improve system power factor, reduce transformer and line losses, improve grid voltage quality, and increase equipment utilization.
Main features
The complete design adopts lying down, compact structure and small floor space.
The capacitor frame is a modular design, which is convenient for transportation and installation.
It is suitable for outdoor and indoor use.
Parameters
Rated voltage |
6,10,35,66,110Kv Etc. |
Rated frequency |
50/60Hz |
Rated capacity |
3600,4800,6000,8000,10000,20000,80000kvar Etc. |
Reactance rate |
1%,5%,12% |
Connection mode: |
single star connection (open triangle AK, phase voltage differential protection AC, bridge differential pressure AQ) double star connection (unbalanced current protection BL) |
Installation place |
outdoor or indoor |
Environmental temperature category |
-40℃～+45℃ |
Altitude |
≤4000 |
Solar radiation intensity |
0.11W/cm2 |
Pollution level |
Ⅳ grade |
Relative humidity |
For indoor reactors, the monthly average relative humidity does not exceed 90%, and the daily average does not exceed 95% |
Earthquake intensity |
The basic design erthquake intensity is 8 degrees; that is, the horizontal acceleration is 0.3g and the vertical acceleration is 0.15g |
The maximum wind speed of outdoor type |
35m/s |
Three-cycle safety factor of sinusoidal resonance |
≥1.67 |
Classification and usage
Classification
According to the installation type, it can be divided into two types: cabinet type and frame type.
According to the switching mode, it can be divided into manual switching and automatic switching.
According to the conditions of use, it can be divided into indoor and outdoor types.
Function:
It is mainly used in three-phase power systems such as power frequency voltage 10kV～750kV to adjust and balance the voltage of the substation network, improve the power factor, reduce the loss, and improve the quality of power supply.
-
6KV High Voltage Power Capacitor Single Phase With SS Case
-
15kV High Voltage Shunt Capacitor 400kvar Reduce Power Loss
-
7.75kV 475kVar High Voltage Power Factor Capacitor Bank
-
10.04kV 246.4kVar HV High Voltage Capacitor Increase Equipment Utilization
-
6.35KV100 kVar High Voltage Capacitor Bank
-
7.94KV 460kVar High Voltage Filter Capacitor Improve Power Factor
-
4.04kV 200 kVar Capacitor Bank High Voltage
-
35kV-110kV High Voltage Shunt Capacitor Bank With Large Capacity
-
6kV~10kV Customized High Voltage Shunt Capacitor Bank
-
10kV 200kvar High voltage Power Capacitor
-
Design Solution of 24kV Dry Air Insulated Ring Main UnitThe combination of Solid Insulation Assist + Dry Air Insulation represents the development direction for 24kV RMUs. By balancing insulation requirements with compactness and employing solid auxiliary insulation, insulation tests can be passed without significantly increasing phase-to-phase and phase-to-ground dimensions. Encapsulating the pole column solidifies the insulation for the vacuum interrupter and its connecting conductors.Maintaining the 24kV outgoing busbar phase spacing at 110mm,16/08-2025 -
Optimization Design Scheme for the 12kV Air-Insulated Ring Main Unit Isolating Gap to Reduce Breakdown Discharge ProbabilityWith the rapid development of the power industry, the ecological concept of low-carbon, energy-saving, and environmental protection has been deeply integrated into the design and manufacturing of power supply and distribution electrical products. The Ring Main Unit (RMU) is a key electrical device in distribution networks. Safety, environmental protection, operational reliability, energy efficiency, and economy are inevitable trends in its development. Traditional RMUs are primarily represented16/08-2025 -
Analysis of Common Problems in 10kV Gas-Insulated Ring Main Units (RMUs)Introduction:10kV gas-insulated RMUs are widely used due to their numerous advantages, such as being fully enclosed, possessing high insulation performance, requiring no maintenance, having a compact size, and offering flexible and convenient installation. At this stage, they have gradually become a critical node in urban distribution network ring-main power supply and play a significant role in the power distribution system. Problems within gas-insulated RMUs can severely impact the entire di16/08-2025 -
SF6-Free Solution for Air-Insulated/Eco-friendly Gas Ring Main UnitsⅠ. Technical Bottlenecks of SF₆ SubstitutionInsulation Medium Performance Gapo Dried Air/N₂ insulation strength is only 1/3 of SF₆, requiring expansion of contact gap from 60mm to ≥150mm.o Conventional spring mechanisms lack energy to drive rapid closure of large gaps, easily causing contact ablation due to pre-strike.o Synthetic gases (e.g., C4+CO₂) decompose under arcing, leading to irreversible insulation degradation.Mechanical Structural Limitationso National Grid standardization fix16/08-2025 -
Implementation Scheme for Installing Lightning Arresters or Voltage Transformers in Gas-Insulated Ring Main UnitsAccording to insulation type, ring main units (RMUs) can be categorized as gas-insulated or air-insulated. The former installs primary circuit components in a sealed metal enclosure filled with low-pressure gas (primarily SF₆ or mixed gases) as the insulating medium, using cable terminals for incoming and outgoing lines. Due to superior insulation, compact size, and modular design, they are widely used in 10kV outdoor distribution substations and prefabricated transformer stations. However, thei16/08-2025 -
Pressure Relief Safety Solution for Gas-Insulated Ring Main UnitsⅠ. Problem ContextAs a core component in urban power distribution networks, ring main units (RMUs) are widely used in residential areas, factories, and public buildings due to their compact structure, low cost, and high reliability. However, internal equipment failures or arc faults may generate high-temperature, high-pressure gas, leading to cabinet explosions that endanger personnel and equipment. While traditional sealed designs maintain insulation integrity, they fail to rapidly release sud16/08-2025
