Customization 110kV 1200MVA/500kV transformer for power transmission
| Brand | ROCKWILL |
| Model NO. | 1200MVA/500kV transformer for power transmission |
| Rated frequency | 50/60Hz |
| Series | ODFPSZ |
Description of 110kV Transmission Transformer
As a pioneer in China's power transformer industry, we have specialized in the R&D and manufacturing of power transformer equipment for decades, and established industry standards with core technologies.
A 110kV Transmission Transformer is a medium-to-high voltage power transformer designed for regional electricity transmission and distribution networks. It serves as a critical link between high-voltage transmission grids (e.g., 220kV/500kV) and local distribution systems, stepping down voltage from 110kV to lower levels (typically 10kV/35kV) for industrial, commercial, and residential use. Widely deployed in substations, industrial parks, and urban/rural areas, it ensures stable power supply, reduces transmission losses over medium distances, and supports reliable grid operation.
3-ph,1200MVA/500kV
The voltage classes of some of these Power Transformer include 110kV 115kV 123kV 125kV 126kV 132kV 138kV 145kV 150kV 154kV 161kV 170kV 220kV 225kV 230kV 245kV 275kV 330kV 345kV 363kV 380kV 400kV 500kV Power transformers of voltage ，and aboveand customization is available.
This power transformer is fully compliant with international standards including IEC 60076-1, IEEE C57.12.00, ANSI C57.12.90, AS/NZS 60076.5 and EN 61558-1. It meets quality requirements and is widely adaptable to the operational needs of power grids in multiple overseas regions.
Features of 110kV Transmission Transformer
Application Field
Power Plant Step-up Substation
Industrial Power System
Hub Substation
-
Photovoltaic inverter grid-connected transformers
-
5kVA-1000kVA Solar isolation transformers
-
304 stainless steel photovoltaic isolation transformer
-
Photovoltaic power generation inverter isolation transformer
-
Photovoltaic grid-connected isolation transformer
-
Low-Loss Three-Phase Photovoltaic Isolation Transformer
-
1kVA-3000kVA Photovoltaic Isolation Transformer
-
Long-Lasting 800V/800V Photovoltaic Transformer for Continuous Solar Energy Supply
-
10kVA Outdoor Three-Phase Photovoltaic Isolation Transformer
-
Photovoltaic Auxiliary Energy Storage Transformer
-
Design Solution of 24kV Dry Air Insulated Ring Main UnitThe combination of Solid Insulation Assist + Dry Air Insulation represents the development direction for 24kV RMUs. By balancing insulation requirements with compactness and employing solid auxiliary insulation, insulation tests can be passed without significantly increasing phase-to-phase and phase-to-ground dimensions. Encapsulating the pole column solidifies the insulation for the vacuum interrupter and its connecting conductors.Maintaining the 24kV outgoing busbar phase spacing at 110mm,16/08-2025 -
Optimization Design Scheme for the 12kV Air-Insulated Ring Main Unit Isolating Gap to Reduce Breakdown Discharge ProbabilityWith the rapid development of the power industry, the ecological concept of low-carbon, energy-saving, and environmental protection has been deeply integrated into the design and manufacturing of power supply and distribution electrical products. The Ring Main Unit (RMU) is a key electrical device in distribution networks. Safety, environmental protection, operational reliability, energy efficiency, and economy are inevitable trends in its development. Traditional RMUs are primarily represented16/08-2025 -
Analysis of Common Problems in 10kV Gas-Insulated Ring Main Units (RMUs)Introduction:10kV gas-insulated RMUs are widely used due to their numerous advantages, such as being fully enclosed, possessing high insulation performance, requiring no maintenance, having a compact size, and offering flexible and convenient installation. At this stage, they have gradually become a critical node in urban distribution network ring-main power supply and play a significant role in the power distribution system. Problems within gas-insulated RMUs can severely impact the entire di16/08-2025 -
SF6-Free Solution for Air-Insulated/Eco-friendly Gas Ring Main UnitsⅠ. Technical Bottlenecks of SF₆ SubstitutionInsulation Medium Performance Gapo Dried Air/N₂ insulation strength is only 1/3 of SF₆, requiring expansion of contact gap from 60mm to ≥150mm.o Conventional spring mechanisms lack energy to drive rapid closure of large gaps, easily causing contact ablation due to pre-strike.o Synthetic gases (e.g., C4+CO₂) decompose under arcing, leading to irreversible insulation degradation.Mechanical Structural Limitationso National Grid standardization fix16/08-2025 -
Implementation Scheme for Installing Lightning Arresters or Voltage Transformers in Gas-Insulated Ring Main UnitsAccording to insulation type, ring main units (RMUs) can be categorized as gas-insulated or air-insulated. The former installs primary circuit components in a sealed metal enclosure filled with low-pressure gas (primarily SF₆ or mixed gases) as the insulating medium, using cable terminals for incoming and outgoing lines. Due to superior insulation, compact size, and modular design, they are widely used in 10kV outdoor distribution substations and prefabricated transformer stations. However, thei16/08-2025 -
Pressure Relief Safety Solution for Gas-Insulated Ring Main UnitsⅠ. Problem ContextAs a core component in urban power distribution networks, ring main units (RMUs) are widely used in residential areas, factories, and public buildings due to their compact structure, low cost, and high reliability. However, internal equipment failures or arc faults may generate high-temperature, high-pressure gas, leading to cabinet explosions that endanger personnel and equipment. While traditional sealed designs maintain insulation integrity, they fail to rapidly release sud16/08-2025
