Medium Voltage Shunt Capacitors
| Brand | ROCKWILL |
| Model NO. | Medium Voltage Shunt Capacitors |
| Rated voltage | 25kV |
| Rated capacity | 200kVA |
| cabinet type | 标准型 |
| Series | CP/CH |
Introduction
Our family of TRINETICS® shunt capacitors incorporate features for top performance and high field reliability in Medium Voltage distribution and substation applications. Capacitors are
available in 15kV, 25kV & 35kV classes, offering power factor improvement advanced applications requiring voltage regulation, and loss reduction.
Features and Benefits
● 409 series stainless steel case
● Finish allows superior heat dissipation and offers excellent protection against corrosion in outdoor environments
● Epoxy primer and two coats of polyurethene top coat
● Paint thickness exceeds 85 microns
● Welded terminals are mechanically stronger and provide more consistent mounting than soldered terminals
● Heavy-Duty bolted connections provide superior performance to tab-and-crimp
● Solid stud eliminates inconsistencies associated with solder-filled studs
● All polypropylene film, foil element construction, stainless steel enclosure, and non-PCB dielectric fluid
● High current withstand capability
● Externally fused standard, internally fused available as an option
● Conforms with IEEE-18/IEC60871-1
● 1- or 2-bushing designs
● 50, 100, 150, 200, 300, 400kVAR standard sizes
● 500, 600kVAR and other sizes available*
● 95, 110, 125 or 150kV BIL (other BIL ratings available upon request)
Applications
● For Medium Voltage distribution and substation applications
● Power Factor Correction (PFC)
● Smart Grid applications including Volt/VAr Optimization (VVO) and Conservation Voltage Reduction (CVR)
● Advanced distribution grid solution
applications
● Voltage regulation and loss reduction
● Metal enclosed banks or pole racks
● Harmonic filter banks
Technology parameters
-
6KV High Voltage Power Capacitor Single Phase With SS Case
-
15kV High Voltage Shunt Capacitor 400kvar Reduce Power Loss
-
7.75kV 475kVar High Voltage Power Factor Capacitor Bank
-
10.04kV 246.4kVar HV High Voltage Capacitor Increase Equipment Utilization
-
6.35KV100 kVar High Voltage Capacitor Bank
-
Compact HV Shunt Capacitor Bank upto 80000kVar
-
7.94KV 460kVar High Voltage Filter Capacitor Improve Power Factor
-
4.04kV 200 kVar Capacitor Bank High Voltage
-
35kV-110kV High Voltage Shunt Capacitor Bank With Large Capacity
-
6kV~10kV Customized High Voltage Shunt Capacitor Bank
-
Design Solution of 24kV Dry Air Insulated Ring Main UnitThe combination of Solid Insulation Assist + Dry Air Insulation represents the development direction for 24kV RMUs. By balancing insulation requirements with compactness and employing solid auxiliary insulation, insulation tests can be passed without significantly increasing phase-to-phase and phase-to-ground dimensions. Encapsulating the pole column solidifies the insulation for the vacuum interrupter and its connecting conductors.Maintaining the 24kV outgoing busbar phase spacing at 110mm,16/08-2025 -
Optimization Design Scheme for the 12kV Air-Insulated Ring Main Unit Isolating Gap to Reduce Breakdown Discharge ProbabilityWith the rapid development of the power industry, the ecological concept of low-carbon, energy-saving, and environmental protection has been deeply integrated into the design and manufacturing of power supply and distribution electrical products. The Ring Main Unit (RMU) is a key electrical device in distribution networks. Safety, environmental protection, operational reliability, energy efficiency, and economy are inevitable trends in its development. Traditional RMUs are primarily represented16/08-2025 -
Analysis of Common Problems in 10kV Gas-Insulated Ring Main Units (RMUs)Introduction:10kV gas-insulated RMUs are widely used due to their numerous advantages, such as being fully enclosed, possessing high insulation performance, requiring no maintenance, having a compact size, and offering flexible and convenient installation. At this stage, they have gradually become a critical node in urban distribution network ring-main power supply and play a significant role in the power distribution system. Problems within gas-insulated RMUs can severely impact the entire di16/08-2025 -
SF6-Free Solution for Air-Insulated/Eco-friendly Gas Ring Main UnitsⅠ. Technical Bottlenecks of SF₆ SubstitutionInsulation Medium Performance Gapo Dried Air/N₂ insulation strength is only 1/3 of SF₆, requiring expansion of contact gap from 60mm to ≥150mm.o Conventional spring mechanisms lack energy to drive rapid closure of large gaps, easily causing contact ablation due to pre-strike.o Synthetic gases (e.g., C4+CO₂) decompose under arcing, leading to irreversible insulation degradation.Mechanical Structural Limitationso National Grid standardization fix16/08-2025 -
Implementation Scheme for Installing Lightning Arresters or Voltage Transformers in Gas-Insulated Ring Main UnitsAccording to insulation type, ring main units (RMUs) can be categorized as gas-insulated or air-insulated. The former installs primary circuit components in a sealed metal enclosure filled with low-pressure gas (primarily SF₆ or mixed gases) as the insulating medium, using cable terminals for incoming and outgoing lines. Due to superior insulation, compact size, and modular design, they are widely used in 10kV outdoor distribution substations and prefabricated transformer stations. However, thei16/08-2025 -
Pressure Relief Safety Solution for Gas-Insulated Ring Main UnitsⅠ. Problem ContextAs a core component in urban power distribution networks, ring main units (RMUs) are widely used in residential areas, factories, and public buildings due to their compact structure, low cost, and high reliability. However, internal equipment failures or arc faults may generate high-temperature, high-pressure gas, leading to cabinet explosions that endanger personnel and equipment. While traditional sealed designs maintain insulation integrity, they fail to rapidly release sud16/08-2025
