Transformers for dry energy storage
| Brand | ROCKWILL |
| Model NO. | Transformers for dry energy storage |
| Rated voltage | 24kV |
| Rated frequency | 50/60Hz |
| Series | SGEC |
Product Overview
Transformers for dry energy storage are an important part of energy storage power stations, which are used to convert and store electrical energy during the trough period of the power grid and release it when needed, which can effectively play the role of peak shaving and valley filling.
Feature
Improve generator set utilization and achieve more stable performance：With the development of social economy and the improvement of people's living standards, the peak-valley load difference of the power grid has been increasing year by year. Generator sets, especially thermal power units, have low utilization hours. The power grid shows the characteristics of sufficient electricity but insufficient power, and power shortages occur during the peak electricity consumption periods in summer and winter.
Lower cost, easy installation and maintenance：Large-scale energy storage power stations play an obvious role in peak shaving and valley filling for the power grid. They will become an important means of grid peak regulation in the future and have broad application prospects. In addition, dry-type energy storage transformers can also serve as a backup part of cold loads. They are thus widely used in energy storage power stations, metallurgical industry, petrochemical industry, cement manufacturing, water supply, sewage treatment, mining industry, papermaking, pharmaceuticals, transmission machinery, wind turbines, wind tunnel tests, etc. Dry-type transformers are small in size and suitable for "fireproof and explosion-proof" occasions.
Basic parameters
Note: The above are general parameters, if there are different parameter requirements, they can be customized!
-
6kV 6.3kV 6.6kV 10kV 10.5kV 11kV Neutral Grounding/earthing Transformer Dry Type Power Transformer direct supply
-
35kV 36kV 44kV 66kV Three Phase Cast Resin Dry Type Zigzag (Z-Type) Grounding Transformer
-
SG Series Three-phase Air-immersed Transformer
-
SC Series Dry-Type Transformer
-
Amorphous alloy core dry-type transformer
-
Dry-Type Rectifier Transformers for DC Ice Melting Devices
-
H-Bridge Rectifier Dry-Type Transformers
-
Energy-Feedback Dry-Type Transformers
-
Dry-Type Transformers for Metallurgical Furnaces
-
Dry-Type Transformers for Ships and Oil Drilling Platforms
-
Design Solution of 24kV Dry Air Insulated Ring Main UnitThe combination of Solid Insulation Assist + Dry Air Insulation represents the development direction for 24kV RMUs. By balancing insulation requirements with compactness and employing solid auxiliary insulation, insulation tests can be passed without significantly increasing phase-to-phase and phase-to-ground dimensions. Encapsulating the pole column solidifies the insulation for the vacuum interrupter and its connecting conductors.Maintaining the 24kV outgoing busbar phase spacing at 110mm,16/08-2025 -
Optimization Design Scheme for the 12kV Air-Insulated Ring Main Unit Isolating Gap to Reduce Breakdown Discharge ProbabilityWith the rapid development of the power industry, the ecological concept of low-carbon, energy-saving, and environmental protection has been deeply integrated into the design and manufacturing of power supply and distribution electrical products. The Ring Main Unit (RMU) is a key electrical device in distribution networks. Safety, environmental protection, operational reliability, energy efficiency, and economy are inevitable trends in its development. Traditional RMUs are primarily represented16/08-2025 -
Analysis of Common Problems in 10kV Gas-Insulated Ring Main Units (RMUs)Introduction:10kV gas-insulated RMUs are widely used due to their numerous advantages, such as being fully enclosed, possessing high insulation performance, requiring no maintenance, having a compact size, and offering flexible and convenient installation. At this stage, they have gradually become a critical node in urban distribution network ring-main power supply and play a significant role in the power distribution system. Problems within gas-insulated RMUs can severely impact the entire di16/08-2025 -
SF6-Free Solution for Air-Insulated/Eco-friendly Gas Ring Main UnitsⅠ. Technical Bottlenecks of SF₆ SubstitutionInsulation Medium Performance Gapo Dried Air/N₂ insulation strength is only 1/3 of SF₆, requiring expansion of contact gap from 60mm to ≥150mm.o Conventional spring mechanisms lack energy to drive rapid closure of large gaps, easily causing contact ablation due to pre-strike.o Synthetic gases (e.g., C4+CO₂) decompose under arcing, leading to irreversible insulation degradation.Mechanical Structural Limitationso National Grid standardization fix16/08-2025 -
Implementation Scheme for Installing Lightning Arresters or Voltage Transformers in Gas-Insulated Ring Main UnitsAccording to insulation type, ring main units (RMUs) can be categorized as gas-insulated or air-insulated. The former installs primary circuit components in a sealed metal enclosure filled with low-pressure gas (primarily SF₆ or mixed gases) as the insulating medium, using cable terminals for incoming and outgoing lines. Due to superior insulation, compact size, and modular design, they are widely used in 10kV outdoor distribution substations and prefabricated transformer stations. However, thei16/08-2025 -
Pressure Relief Safety Solution for Gas-Insulated Ring Main UnitsⅠ. Problem ContextAs a core component in urban power distribution networks, ring main units (RMUs) are widely used in residential areas, factories, and public buildings due to their compact structure, low cost, and high reliability. However, internal equipment failures or arc faults may generate high-temperature, high-pressure gas, leading to cabinet explosions that endanger personnel and equipment. While traditional sealed designs maintain insulation integrity, they fail to rapidly release sud16/08-2025
